Draft Conformity Assessment (Mutual Recognition Agreements) (Amendment) Regulations 2022

Kevin Hollinrake Excerpts

Tuesday 13th December 2022 General Committees

[The Parliamentary Under-Secretary of State for Business, Energy and Industrial Strategy (Kevin Hollinrake)]

I beg to move,

That the Committee has considered the draft Conformity Assessment (Mutual Recognition Agreements) (Amendment) Regulations 2022.

It is a pleasure to serve with you in the Chair, Mr Twigg. The regulations were laid before the House on 21 November 2022 and implement a trade agreement with Switzerland, a country with which the UK has strong economic and historical ties. Switzerland is the UK’s 10th largest trading partner and our bilateral trade in goods was worth £38 billion in 2021. Members will appreciate the importance of supporting such international trade relationships while protecting our product safety and legal metrology system, which is among the strongest in the world.

The UK signed the mutual recognition agreement with Switzerland on 17 November 2022 to reduce technical barriers to trade related to conformity assessment. The MRA promotes trade in goods between the UK and Switzerland by helping businesses to simplify their conformity assessment arrangements. Product safety legislation in the UK and Switzerland—indeed, in most countries—often requires products to be assessed against minimum essential requirements, sometimes by a conformity assessment body, or CAB, external to the business. MRAs can reduce barriers by allowing the conformity assessment to be undertaken by a body based in the UK prior to export to the relevant country, which in this case is Switzerland. Likewise, they enable procedures carried out by recognised overseas CABs and appointed bodies to be recognised in respect of our domestic regulations.

The products in scope of the MRA cover many areas, from rules on noise-emitting equipment for use outdoors to measuring instruments and much in between. For example, if a small UK business that manufactures potentially noisy outdoor equipment such as lawnmowers is considering exporting that equipment to Switzerland, it might find it can get all its advice and approvals from a single UK-based CAB. If that means the business reduces its costs, it can of course pass that saving on to its customers.

[Seema Malhotra (Feltham and Heston) (Lab/Co-op)]

Will the Minister clarify whether the MRA will make any difference for the five sectors to which it applies or in effect continues the temporary arrangements we currently have for those sectors with the Swiss?

--- Later in debate ---

[Kevin Hollinrake]

It makes a difference in that it makes the arrangements permanent. We have a three-year deal; the MRA makes the temporary arrangements permanent and formalises the UK-Switzerland relationship in terms of conformity assessment bodies.

[Seema Malhotra]

I understand that the MRA may make temporary arrangements permanent but I am trying to understand whether anything is different under it for the five sectors to which it applies. Will anything affect businesses that are currently trading under the temporary arrangements for products that they export to Switzerland? Or does the MRA in effect continue the current temporary arrangements, even it makes them permanent?

[Kevin Hollinrake]

As I understand it, nothing is different, but I will check with my officials and come back to the hon. Lady before the end of the debate.

The outdoor equipment manufacturer I referred to will be able to continue to access international markets more easily when assessment is facilitated in the way I described, thereby increasing its exporting potential and customer choice. The MRA benefits that the UK experienced for years as an EU member are maintained through the provisions of the new MRA with Switzerland.

The statutory instrument we are considering implements the MRA by amending an earlier set of regulations made last year: the Conformity Assessment (Mutual Recognition Agreements) and Weights and Measures (Intoxicating Liquor) (Amendment) Regulations 2021.

[Andy McDonald (Middlesbrough) (Lab)]

The Minister is explaining to us that this is putting the UK and Switzerland in the same position as now, making a temporary arrangement permanent. On a point of clarification, is there any differential between the relationship with Switzerland on those matters, as compared with that with the rest of the EU? Is there any difference or are similar arrangements being made?

[Kevin Hollinrake]

The rest of the EU uses the CE mark. If we want to export products to the EU, we use the CE mark. That is a European certification process. These are relationships simply between the UK and Switzerland, not with the rest of the European Union. We have a separate arrangement for that.

The 2021 regulations are amended by the instrument we are considering so that they are also included in the Swiss MRA. I will return briefly to that point when discussing the territorial scope and the specifics of the regulations.

I will now consider each of the areas in greater detail. For goods coming into the UK that are in the scope of the MRA, we have committed to recognising the results of conformity assessment procedures carried out by recognised Swiss CABs and appointed bodies against our domestic regulations. The statutory instrument makes clear that assessments carried out by a recognised body based in Switzerland should be treated as equivalent to those carried out by a UK-approved or appointed body when products are placed on the market in Great Britain.

[Seema Malhotra]

It is important to be clear about where there is simply continuity rather than giving the impression of something new happening. To clarify, the SI means continuity of importing into the UK, without further checks, for goods made in Switzerland and tested for conformity against UK standards by a conformity assessment body in Switzerland. It is simply a continuity of arrangements under the Swiss temporary measures for the five sectors to which it applies.

[Kevin Hollinrake]

As I understand it—she may want to clarify—that is a continuation of the hon. Lady’s earlier question. Everything will be the same and the only difference is that UK manufacturers should affix a new Swiss mark to their products.

The Secretary of State will add Swiss bodies recognised under the agreement to the UK’s register of CABs, known as the UK market CAB database, which is a publicly available resource used by the UK’s market surveillance bodies and regulators to verify the status of CABs that approve products sold in the UK. Having all the CABs competent to assess for the domestic market in one place creates a one-stop shop for our UK enforcement authorities and businesses, helping them quickly to find and verify the credentials of CABs. The draft regulations do not change the substance of the requirements for third-party assessment, nor do they amend any requirement related to a product’s specifications or product safety credentials.

Turning to goods in scope of the UK-Swiss MRA that are assessed by UK CABs, the SI provides for the Secretary of State to designate CABs as competent to assess that goods comply with certain regulatory requirements of Switzerland under the MRA, as set out in a schedule to the SI. To give an example, that means that where a UK-based CAB wishes to be recognised by the Swiss authorities as competent to test and assess, for example, for Switzerland’s radio equipment requirements, the body can apply to the UK Accreditation Service to be accredited as competent to test against those Swiss requirements. The Secretary of State may then designate the body under the UK’s MRA with Switzerland to assess radio equipment for export to Switzerland. Once the CAB is designated, a UK manufacturer that uses the CAB’s services to assess its products for the domestic market has the option to use that same body, rather than a Swiss one, to do its assessment. The manufacturer can continue to place products on the Swiss market efficiently and without extra costs, potentially passing savings on to consumers.

The Secretary of State, or a person authorised to act on their behalf, may also disclose information to other parties to an MRA, where required by an MRA. We may, for example, pass on information related to goods originating in Switzerland that have been suspended by UK enforcement authorities under commitments to co-operate in the MRA with Switzerland. Disclosure will be made in accordance with data protection legislation.

Let me turn to the territorial scope of the draft regulations. They extend to the whole of the UK, apart from regulation 5, on recognition of conformity assessment by Swiss CABs, which extends to Great Britain only. Northern Ireland will continue to recognise the results of conformity assessment procedures done under the MRA between the European Union and Switzerland. That is in accordance with the terms of the Northern Ireland protocol to the withdrawal agreement. Regulations 6 and 7 of the 2021 regulations, to which I referred earlier, deal respectively with the Secretary of State’s power to designate UK-based bodies under these agreements and to information sharing. The powers extend to the whole of the UK, which means that CABs across the UK can be designated under the MRA and the Secretary of State will be able to share relevant information as required under the MRA.

In conclusion, the SI will provide certainty about the UK’s approach to recognising and designating CABs for products in scope of the MRA. We introduced the draft regulations to give effect to provisions that keep barriers to trade low while preserving our robust safety rules. We do so as a Government who are committed to ensuring that consumers are protected from unsafe products as we look to deliver a product safety regime that is simple, flexible and fit for the opportunities ahead of us. I commend the draft regulations to the Committee.

--- Later in debate ---

[Kevin Hollinrake]

I appreciate the shadow Minister’s points, which were extensive and exhaustive. I want to clarify: these regulations relate to only UK companies or Swiss companies who are trading with each other. They do not relate to wider exports to the European Union or European Union exports to the UK. That is the point.

Using the hon. Lady’s example, if a company in Thirsk and Malton decided to move to Northern Ireland, and only wanted to export to Switzerland, then it could use a Swiss-based conformity assessment body to have its products verified. It could use the Swiss mark. If a Swiss company wanted to export its products to Northern Ireland, it could use the CE mark. That is how it would work, because of the different arrangements in Northern Ireland and the rest of the United Kingdom.

The hon. Lady asks if the process will be slower or more costly. That is the absolute opposite of what the regulations are about. They are about UK companies, or Swiss companies, who want to trade with each other, who want to use a different mark, because they are only trading with Switzerland or the United Kingdom.

[Seema Malhotra]

Will the Minister give way?

[Kevin Hollinrake]

I will not, because of the pressure of time. I have a lot to go through and she has asked a lot of questions, which I want to cover.

[Seema Malhotra]

It is just to clear up a misunderstanding.

[Kevin Hollinrake]

Okay.

[Seema Malhotra]

That question was about whether there will be a slower or more costly process in relation to the eight sectors that are not covered by the MRA.

[Kevin Hollinrake]

I think the hon. Lady asked both questions. Those sectors are still covered by the CE mark. It is not possible to distinguish a separate Swiss mark from the CE mark, so those eight sectors would still be covered by the CE mark. Nothing would change for companies that are trading in those sectors, so there will be no greater cost; there will be less cost for companies who are just trading bilaterally between the UK and Switzerland. The conformity assessment will be done once, not twice. If companies in that particular sector need to trade with Switzerland, that would have had to be done twice. These provisions are only for companies that are trading only between the UK and Switzerland. That is the key part of this statutory instrument.

On divergence in standards—another point raised by the hon. Lady—the regulations are made with the principle of divergence in mind. We can diverge, but if a company is exporting to Switzerland, it must have regard to Swiss regulations. It has to make sure that the product conforms with the Swiss safety regulations and other conformity regulations. That is the point. We can diverge, certainly, but if a company is exporting to Switzerland, it has to make sure that its products conform with Swiss rules. That is the point. Divergence is possible under these provisions.

The trade level in the five sectors is very hard to quantify. I cannot give the hon. Lady a number on that. She asked about the extent of trade covered by those five sectors and it is not possible to separate that out—[Interruption.] No, the figures relate to the three sectors—the 70%. If the hon. Lady wants to write to me to explore the details further, perhaps that will be swifter than arguing about it here.

As for the number of businesses we engage with, we engage with businesses all the time. I do not have those figures to hand.

Our trade with Switzerland is significant, and technical agreements on trade and goods such as the MRA that this SI will implement will serve an important function in facilitating and encouraging that trade. I have set out how the SI will preserve such measures to keep barriers to trade with Switzerland low while maintaining our robust product safety framework. In supporting the SI, we are ensuring that our manufacturers and consumers benefit from maintaining the arrangements to minimise the duplication of conformity assessment requirements between ourselves and Switzerland. I commend the SI to the Committee.

Question put and agreed to.

Resolved,

That the Committee has considered the draft Conformity Assessment (Mutual Recognition Agreements) (Amendment) Regulations 2022.